Slurry Seal Zr300d Ims

• Faces: SiC and Ceramic
• Shaft Diameter: 20mm to 80mm
• Pressure: Up to 5 bar
• Temperature: Up to 120degreeC
• Speed: 3000rpm
• Application: Specially developed for steel plants on CRM (Cold Rolling Mill) in acid circulation pumps for PP, PV

Designed to handle solids up to 20% by weight. Hydraulically balanced faces for excellent seal reliability. Springs are located outside the process. Flushing helps to lubricate or cool the seal faces from atmospheric side of mechanical seal. They are cost effective for basic application such as Centrifugal Pumps and other Equipment with Rotating Shaft, Handling Crystallizing Slurry, Suspended Solid Slurry, Saturated Chemical Slurry, General Chemical Slurry.

Features:

• Slurry seal.
• Double seal for the Non-metallic pump.
• Standardized modular design.
• Inside Mounted.
• Inside Mounted

• Seal Ring Faces: SiC and Carbon
• Seat Faces: SiC and Ceramic
• Elastomer: Viton, TTV, FEP, and FFKM
• MOC: SS 316, PVDF - change of MOC on request

• Specially developed for steel plants on CRM (Cold Rolling Mill) in acid circulation pumps for PP, PVDF & PFA Lining Pump.

• Usage/Application: Boiler Feed Water And Heavy Duty Process Pumps
• Type: 43
• Shaft Diameter: 20mm to 100mm
• Pressure: Up To 60 Bar
• Temperature: -30degreeC To 260degreeC
• Speed: 3000rpm

The Seal Type 43 with Single Spring designed and is depended on the Shaft Rotation. Looking from Sliding Face of the Rotating Seal Ring is designed as right handed Shaft Rotation needs a right-hand Spring and Vice-Versa. Superproof seals manufacture single coil spring mechanical seal in INDIA. In Seal Type 43 (''O'' ring type) is designed as Torque Transmission from Drive Collar to Seal Ring to be done through Sturdy Drive Lugs. In Seal Type 44 (''V'' Packing Type) is designed as Torque Transmission from Drive Collar to Seal Ring to be done through Sturdy Drive Lugs. These Seals are Cost Effective Seals for Basic Application Equipment such as Centrifugal Pump and other Equipment with Rotating Shaft

Materials

• Seal Ring Faces Sp. Carbon, SiC
• Seat Faces: SiC and TC
• Elastomer: Viton, EPDM, NBR, FFKM
• Moc: SS 316, Duplex, Super Duplex, Hastelloy C, Monal

• Usage/Application: Specially developed for steel plants on CRM (Cold Rolling Mill) in acid circulation pumps for PP, PVDF PFA Lining Pump.
• Type: ZR300/51U/P
• Shaft Diameter: 20mm to 80mm
• Pressure: Up to 8 bar
• Temperature: Up to 120degreeC
• Speed: 3000rpm

Seal Type ZR300/51U/P IMS Slurry Seal for Non-Metallic Pump Designed to handle abrasive practical up to 30% by weight. Specially designed Back plate of pump and Impeller in this particular seal type ZR300/51U/P which gives better seal life and performance. Hydraulically balanced faces for excellent seal reliability. Helical Pumping ring helps for better-siphoning effect. Specially coated spring is located outside the process. Externally supplied barrier fluid helps to lubricate the seal faces from atmospheric side of the mechanical seal.

• Slurry seal.
• Double seal for a Nonmetallic pump.
• Standardized modular design.
• Inside Mounted

• Seal Ring Faces: SiC and Carbon
• Seat Faces: SiC
• Elastomer: Viton, TTV, FEP, and FFKM
• MOC: SS 316, PVDF - Change of moc on request

• Specially developed for steel plants on CRM (Cold Rolling Mill) in acid circulation pumps for PP, PVDF PFA Lining Pump.